..." />ALPINA – The New Alpiner Manufacture

Watches

Published on September 28th, 2015 | by Daniel Sherman Fernandez

0

ALPINA – The New Alpiner Manufacture

Alpina_Geneve_AL_710_Manufacture_caliber

Inspired by an Alpiner automatic model from the 1950’s, the contemporary Alpiner line is the essential timepiece for the gentleman “alpinist” who values understated elegance but does not want to compromise on intrinsic watchmaking content. The combination of the “glass box” sapphire crystal, which today substitutes the hesalite version of the past century, and the vintage looking cream dial with a clear cut case and lugs, give the Alpiner watches their unique classic, yet contemporary look. The transparent case-back of the 41.5mm case features the highly decorated AL-710 in-house developed, produced and assembled caliber.

The in-house AL-710 automatic caliber can be considered as a particular refinement. The form of the black-coated ball bearing rotor that oscillates back and forth is an unmistakable reminder of the significant pendulum rotor of the Alpina 582 Manufacture caliber introduced in 1949. Beautifully decorated with Côtes de Genève and circular graining, the piece has a diameter of 30.5 millimeters. All the bridges and cocks are beveled and rhodium-finished. When the watch has been fully wound, 42 hours of power reserve are available. The large glucydur balance has a frequency of 28,800 vibrations per hour.

The new Alpiner Manufacture model is proposed with a stainless steel case of 41.5mm diameter, and a vintage looking cream dial with applied pearl black numerals. It features also luminous hours and minutes hands and hours markers. The “Glass box” sapphire crystal is scratch resistant and you will be able to admire the beauty of the manufacture movement through the transparent case-back. 5 ATM/50m/150ft water-resistant, the new Alpiner Manufacture is delivered with a dark brown genuine leather strap.

Three central hands indicate the hours, minutes and seconds. The nostalgic look also calls for the date hand to be positioned at 6 o’clock. For a watch movement that has been completely developed and produced in-house, the watchmakers needed 134 components.
Alpina_Geneve_Alpiner_Manufacture_AL-710KM4E6_case-back
Technical details
Reference: AL-710S4E6

Movement
AL-710, Automatic in house manufacture movement
26 jewels
42 power reserve, 28,800/h

Functions
Hours, Minutes, Seconds, Small date by hand

Case
Stainless steel
41.5 mm diameter
Scratch Resistant “Glass box” Sapphire Crystal
5 ATM/50m/150ft Water-resistant
Transparent case-back

Dial
Silvered dial with applied silvered numerals
Small date by hand at 6’ o clock
Luminous hours and minutes hands and hours markers

Strap
Dark brown genuine leather strap

Reference: AL-710KM4E6

Movement
AL-710, Automatic in house manufacture movement
26 jewels
42 power reserve, 28,800/h

Functions
Hours, Minutes, Seconds, Small date by hand

Case
Stainless steel
41.5 mm diameter
Scratch Resistant “Glass box” Sapphire Crystal
5 ATM/50m/150ft Water-resistant
Transparent case-back

Dial
Cream dial with applied Pearl Black numerals
Small date by hand at 6’ o clock
Luminous hours and minutes hands and hours markers

Strap
Dark brown genuine leather strap

 


About the Author

www.dsf.my is a service to the public and other website owners. www.dsf.my is not responsible for, and expressly disclaims all liability for, damages of any kind arising out of use, reference to, or reliance on any information contained within the site www.dsf.my. While the information contained within the site is periodically updated, no guarantee is given that the information provided in this website is correct, complete, and up-to-date. www.dsf.my is not responsible for the accuracy or content of information contained inside.



Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top ↑